DOCK ACCESSORIES

 This 2-piece port to port connector was designed specifically for PRO ports series and allows to connect side-by-side 2 or more ports adding more stability and walking surface between the ports. Recommended for multiple port installation such as jet ski rentals, marinas and resorts.

• Rotomolded construction
• Improved design for easier installation.
• Hardware included.
• Flagstone pattern and color to match port.
• Includes: 2 sets of connectors and hardware.

Double your fun and connect a pair or multiple PWC Ports together utilizing our innovative poly connecting pin system. Pins are placed in the adjacent mounting pockets of your Ports for a secure and rugged hold.

Kit Includes: Two Pin Systems

Fits: SLX 5, SLX 6, Apex 5, Apex 6

Designed specifically for PRO port series these pipe sleeves accommodate 2” and 3″ pipes.

• Quick and easy “drop-in” installation utilizing mounting pipe holes in all 4 corners of the PRO port. Secured with ⅜ stainless steel hardware.
• Simple installation.
• Rigid Rotomolded construction.
• “Bolt-on” design.
• Hardware provided.
• Includes: 2 pipe sleeves, hardware.

Flush Pipe Sleeves allow your Wave Dock to slide up and down in varying water levels. They can also be utilized as Replacement Sleeves for #301012 Wave Dock Post Attachment Kit and are also designed to work with #302055 and #301910 Wave Dock Half Round End Caps.

Available Sleeve Sizes:
3-Inch Sleeves
4-Inch Sleeves

Cover unused pipe mounting holes with this bolt on cap designed specifically fro PRO Series Ports.

• Bolt-On design
• Rigid rotomolded contruction
• Pattern and color matches to the port

The Port Snap-In Cap is available to cover unused mounting pockets in your PWC Port, creating a clean, finished look and a flush surface to walk on!

Fits: SLX 5, SLX 6, Apex 5, Apex 6

Secure your PWC to your port with our Stainless Steel Chain & Clip.

• Comes standard on all APEX and APEX Sport PWC Ports Can be added to SLX PWC Ports.
• Chain attaches underneath SLX bow stop with bolt included. See images for example.

This 2″ Raised Pipe Sleeve increases the stability of Wave Dock by extending the plane in which the insert comes into contact with a 2″ post.  Ideal for calm water applications.

Can also be utilized as Replacement Sleeves for 300099 Wave Dock Post Attachment Kit and are also designed to work with 302055 and 301910 Wave Dock Half Round End Caps.

Provides a secure attachment point for a submersible anchor cable. Simple attachment utilizing the Wave Dock H-Beam Channel. 

 Our top adjusting Anchor Pin Mooring Kit provides a secure attachment point for a submersive anchor chain.
[ Chain Not Included)
Includes: 1 Dock Post Attachment and 1 Anchor Pin. 

Wave Armor® Heavy Duty Dock Post Bracket kits are a functional and stylish way to incorporate Dock posts into your Wave Dock System. Each kit slides easily into the H-Beam Channel on your Wave Dock System. Choose from Flush or Raised Heavy-Duty Dock Post Bracket Kits for rough water.

Available Kit Sizes:

• 2-Inch Raised HD Post Bracket
• 3-Inch Flush HD Post Brack
•  4-Inch Flush HD Post Bracket

Wave Armor® Dock Post Attachment kits are a functional and stylish way to incorporate Dock posts into your Wave Dock System. Each kit slides easily into the H-Beam Channel on your Wave Dock System. Choose from standard Recessed or Raised Dock Post Attachment Kits

Available Kit Sizes:

• 2-Inch (Raised) Pipe Sleeve *
• 3-Inch (Recessed) Pipe Sleeve
• 4-Inch (Recessed) Pipe Sleeve

Wave Armor® Utility Channel  Post Bracket kits are a functional and stylish way to incorporate dock posts into your Wave Dock System. Each kit slides easily into the H-Beam Channel on your Wave Dock System. Choose from Flush or Raised Dock Post Bracket Kits.

Available Kit Sizes:

• 2-Inch (Raised) Pipe Sleeve *
• 3-Inch (Flush) Pipe Sleeve
• 4-Inch (Flush) Pipe Sleeve

Designed to be more compact and accommodate 2″” pipe without an additional pipe sleeve.

• Extends 4.5″” from edge of the dock section.
• Hardware Included

Pylon Hoop Kit for Wave Dock. 8", 10" & 12"
Innovative design of these pylon hoops allows for installation of the Wave Dock with already existing pylons!

• H-Beam channel installation.
• Rotomolded heavy duty construction.
• Available in 3 most common sizes.
• Hardware Included

Slim Utility Channel Post Bracket kit 2″

This post bracket is designed to combine compact size and a convenient utility channel for wires and cord storage.
Extends only 4.5 “ from the edge of the dock.
Hardware included.

Wave Armor’s Universal Dock / Outdoor Benches are designed with both traditional and contemporary styling, embodying both strength and elegance. Constructed of Roto-Molded granite compounded polyethylene, and featuring molded-in beverage holders and anchoring areas, our Outdoor Benches make a welcomed addition to any dock, patio, or lawn. 

• 4-FT.Bench 52″ W x 37″ H x 27″ D
• 5-FT.Bench 64″ W x 37″ H x 27″ D
• 6-FT.Bench 76″ W x 37″ H x 27″ D

 The Bench Attachment System allows the secure mounting of a Wave Armor Dock Bench (Sold Separately) to your Wave Dock System utilizing the H-Beam Channel system. 

• Rotationally Molded, UV Protected Polyethylene
• Positions Your Wave Armor Bench Over the Water, and Off the Deck
• Saves Valuable Deck Space

The Folding Dock Ladder integrates perfectly with the H-Beam Channels of the Wave Dock System. The Ladder can be placed on either side or end of a Dock Section. Folds up and out of the water when not in use. 

•  Rotationally Molded, UV Protected Polyethylene
• Molded-In H-Beam Connector for connecting to Wave Dock
• Folds Up when not in use
• Weight Capacity 400 LBS

 A sturdy and stylish way to store your kayaks or canoes near the water where you use them! The Wave Dock Kayak Rack attaches to the Wave Dock System utilizing the H-Beam Channel.  

• Rotationally-Molded UV Protected Polyethylene
• Weatherproof, UV-Resistant
• Stores 2 Kayaks or Canoes
• Molded-In Eye-Loops In Each Arm (allows easy tie-down or bungee)

 The Wave Dock Kayak Assist is a mounted rail system that provides stability when launching or exiting kayaks and canoes.  The Kayak Assist mounts directly to the Lower Step Down Section (Sold Separately) which connects to the Wave Dock System utilizing the H-Beam Channel. 

Kit Includes: 1 Aluminum Rail and 1 Poly Float 

  Garbage storage close to the action or use a beverage cooler. Includes an inner liner for convenient emptying. Hinged lid protects from wind and sun. 

• Rotationally Molded, UV protected polyethylene
• Lightweight easy to handled and will not crack or fade
• Molded-in mounting space
• Includes T-plate for simple H-Beam channel installation
• Installs on side of any structure
• Fits 13-gallon kitchen trash bag
• Dimensions: 28” L top to bottom base
• Dimensions top opening: 23” W x 18.5” front to back

The NEW Wave Armor flower pot is a modern way to bring vibrant greenery and color to your dock, deck or patio.

• Rotationally Molded, UV protected polyethylene
• Molded-in interior basin for less water maintenance
• Includes T-plate for simple mounting to your Wave Dock, other docks, decks or structures
• Molded-in mounting space, easily installs off the side of any structure
• Dimensions: 8.75” L top to bottom base
• Circumference: 18.03

The New Wave Armor Flower Pot is a modern way to bring vibrant greenery and color to your dock, deck, or patio.  

• Constructed of 100% RotoMolded recyclable, high quality polyethylene with UV protection.
• Designed with molded-in mounting space for ease of installation off the side of any structure.
• Comes with a T Plate for easy mounting to your Wave Dock, other docks, decks or other structures.

Covering unattractive support pipes and adding an elegant touch, our over-the-pipe post covers dramatically change a dock’s overall appearance. This post cover is specifically designed for 2″ pipes. 

• Rotationally Molded, UV protected polyethylene
• Adds a finished look to your dock system and 2″ posts
• Simple slide over the dock post installation
• Dimensions: 54” from the deck surface

 Covering unattractive support pipes and adding an elegant touch, our over-the-pipe post covers dramatically change a dock’s overall appearance. Featuring top recessed pockets for attaching a Wave Armor Solar Light (sold separately). This post cover is specifically designed for 2″ pipes. 

• Rotationally Molded, UV protected polyethylene
• Adds a finished look to your dock system and 2″ posts
• Simple slide over the dock post installation
• Dimensions: 54” from the deck surface

 Covering unattractive support pipes and adding an elegant touch, our over-the-pipe post covers dra Covering unattractive support pipes and adding an elegant touch, our over-the-pipe post covers dramatically change a dock’s overall appearance. 

• Rotationally Molded, UV protected polyethylene
• Adds a finished look to your dock system and 2″ posts
• Molded-in through holes to accommodate rope up to 1 ½” thick
• Simple slide over the dock post installation
• Dimensions: 49.5” from the deck surface

The Heritage post cover is eloquently designed with molded-in through holes to accommodate rope styles up to 1 ½” in diameter to give your dock a different look and feel.  

• Rotationally Molded, UV protected polyethylene
• Adds a finished look to your dock system
• Molded-in through holes to accommodate rope up to 1 ½” thick
• Molded-in H-Beam for easy connect to Wave Armor dock system
• Dimensions: 49.5” from the deck surface

 Solar Dock Lights easily snap into the mounting pockets around the Wave Dock perimeter lighting up your walkway and creating an ambient evening look.  Solar Dock Lights can also be utilized in the recessed pocket on top of the Heritage Dock Post Covers. 

• Solar Lights snap into mounting pockets on Wave Dock Systems
• Solar Lights snap into mounting pockets on Heritage Dock Post Covers.
• Simple and Easy Installation
• Convenient way to add lighting to your dock

Secure your watercraft with our Signature aluminum or nylon cleats designed specially for Wave Armor Dock System. Both cleat styles mounting directly into the insert slots located on the perimeter of the Wave Dock sections. Simple and easy installation using provided hardware.

• Mounts directly into insert slots on the dock section perimeter
• Powder coated aluminum construction (10″ aluminum cleat only)
• Strong nylon construction (8″ nylon cleat only)
• Hardware included

 Complete the finished look of your Wave Dock System with our specially designed poly plugs. These plugs match the Wave Dock deck surface and easily snap into place for a clean, finished look. 

Includes: 20 Plugs 

 This cast aluminum pipe nose cone fits into a 2″ pipe end and prevents mud and rocks from collecting. Simplifying installation and removing process. 

Our Dock Bench Box mounts to the back of our 5 Ft. Dock Bench, offering lockable storage for life jackets and other gear.

Features:

• Rotationally Molded UV Protected Polyethylene
• Lockable
• Frees up Valuable Dock Space
• Storage Area:48″L x 15″ W x 15″ D

Wave Armor’s Lockable Dock Box is the perfect solution for waterfront storage by attaching to your dock system or placing on a patio or other outdoor area, allowing you to store your items with convenience and peace of mind.

Features:

• Lockable storage solution for your dock or outdoor living area
• 100% Roto-Molded, weatherproof and UV resistant polyethylene
• Dimensions:31.25″Lx15.5″Dx 15″H

 Easily slides into the proprietary H-Beam Channel of the Wave Dock System creating many options for securing personalized accessories such as railings, flag poles, mooring whips, live wells and more.
Includes: Two (2) T-Plate Connectors 

 Give your Wave Dock System a finished look with our Snap-In Side Panels. 

Additional Dock Floats provide extra buoyancy to the Wave Dock. Common areas include under heavy gangways and dock benches.

Includes:

• Two (2) Dock Floats
• Four (4) 7″ T-Plates and Hardware

This low profile dock float is designed to compensate and balance buoyancy deficiency caused by heavy gangways or ramps. Provides extra 350 lb of buoyancy per float to a Wave Dock system. Recommended to be pre-assembled with the dock section prior to installation.

• Rotomolded contstruction.
• 350 lbs of extra bouyancy per float.
• No hardware required for installation.

Includes: One float 60″L X 30″W X 12″ H
Weight of the float 30 lbs.

 Designed specially to accommodate flag pole, this sleeve has metal plate on the bottom and perfectly fits in to the pipe sleeve opening of the 60 “ or 40 “ Half Round Dock End Section, or Post Bracket (bracket not included).
2-9/16” inner sleeve dimensions
Hardware included 

The 7′ Ramp Abutment kit is designed to link the Wave Armor Dock ramp to a solid structure on land for added stability. Comes with one metal angle bracket, 3 steel bars, and hardware. Hardware not provided when securing the metal angle bracket to a solid surface on land.

• 3 steel bars included.
• Steel construction.
• Includes hardware to connect to Wave Dock only.

This Heavy Duty hinged aluminum construction kit provides rigid transition from Wave Armor 12 ft Ramp to other solid surfaces, such as custom docks, seawalls, or gangways. Features hinged C-channel aluminum bracket with mounting plate.

Heavy Duty aluminum construction.

Hardware included for Wave Dock 12 ft Ramp installation only.

 12′ Ramp Abudment Hinge is designed to link the Wave Dock to a solid structure on land for added stability. Kit includes one metal angle bracket plate and hardware for attachment to Wave Dock ramp, hardware not provided for securing the metal plate to a solid surface on land. 

The Universal Dock Hinge is designed with two connecting heavy – duty aluminum plates that secure into the Wave Dock H channel and to existing floating docks, custom ramps or gangways. Comes with aluminum hinge, two 24″ T- plates and hardware to connect to the Wave Dock. No hardware supplied to connect to other surfaces.

• Heavy – duty aluminum construction.
• Includes hardware to connect to Wave Dock only.
• Two 24″ T- plates included.

  Add the umbrella of your choice to the dock with our aluminum Umbrella Mount. Secured with provided hardware( for Wave Armor Dock only) it’s an easy way to add a convenient shade to your dock. Requires an additional hardware for installation on other dock systems.

Aluminum Construction
Adjustable hardware recessed slots
Hardware included for Wave Armor Dock ONLY
Requires additional drilling for specific umbrella “leg” size
Compatible with a majority of dock systems and types

The Universal Pergola Plate kit allows you to mount an outdoor structure such as a gazebo or pergola onto the Wave Armor dock surface or any other suitable surface. Kit includes 4 aluminum 12 x 8 plates and hardware for Wave Armor dock only.

Due to variable outdoor structure designs no pre-drilled hardware holes.
Hardware included for Wave Armor dock only.
Can be painted to match your outdoor structure color.

 Finish the look with these handy Bolt-In Caps for a sleek and seamless finish. Includes two (2) caps in Pebble Beach color. 

Easy-in, easy-out! Don’t let the height of your boat turn boarding into a complicated process! The stackable Smart Step system allows for multiple steps to be added on to accommodate the height of any boat.

Features:

• Rotationally Molded, UV protected polyethylene
• Mounts to dock anchoring pipe
• Will allow for additional steps